MADE IN USA
Colonial Pewter Pitcher 16 oz.
Colonial style cream / bar pitcher. Generous 16 ounce capacity, 5.25" tall. A great award and presentation item as well.
- Choice of Finish
- Use the button above to apply your engraving options.
- You may choose either a monogram or text.
- 5 Lines of text maximum.
- 10 Characters per line maximum.
- 7 Fonts available.
- A monogram is $15.
- Text is $15 for the first line and $5 for each additional line.
- Engraved items are NOT refundable.
About Woodbury Pewter...
Woodbury Pewterers was founded in 1952, in the town of Woodbury, CT. by Ruth Holbrook and Lee R. Titcomb. The original location was a small blacksmith shop located next to the historic Hurd House in the center of town. In 1967, the business was re-located to its current location. Each piece of Woodbury Pewter is hand-crafted from the highest quality pewter using many of the same methods and tools that were used in the 18th & 19th centuries. Many of these tools, drawings, and various advertising pieces are on permanent display at our visitors gallery located at the Factory Outlet Store, which features a special section to view Woodbury Pewter pieces actually being made. Woodbury Pewter still remains a “family owned and operated” business with several second and third generation employees. All Woodbury Pewter is hand-crafted in Woodbury, Connecticut. Master craftspeople using a wide variety of methods, carefully produce each piece of pewter with the skills and pride that is clearly apparent in every piece.
How It's Made:
SPINNING: Flat discs of pewter are clamped into a lathe against a wood or metal form called a “chuck”. A hand spinning tool is then pressed against the turning disc with a series of carefully executed sweeps and movements to turn the pewter down over the chuck to form the desired shape.
CASTING: Molten pewter is poured into a bronze mold through a channel called a “Spru” or “Gate” and allowed to cool until solid or in some cases, is poured out at the proper time to create a hollow item such as a spout. Once the metal is “chilled”, the mold is opened and the casting is removed. The cast then has the spru cut off, parting marks removed and is polished and fitted for assembly.
ASSEMBLY: As all the various pewter parts are hand-crafted, each piece is carefully filed, drilled, shaped, burnished or ground to assure a perfect fit. The parts are then soldered together with a jeweler’s torch, using great care not to melt the piece and to assure a flawless joint.
FINISHING: Once the piece has been completed, it is then carefully polished and buffed by hand with a cloth wheel to achieve the desired luster and patina...either satin or bright finish. As with most hand-crafted work, our pewter pieces may vary slightly in shape, size, finish or capacity from one piece to the next.